March Golf Diary 2007
I am sure there are many course managers and Greenkeepers who will be glad to see the back of February. It was a terrible month, with many parts of the country experiencing sustained periods of wet weather.
The following rain statistics from the British Weather Services give an indication of the amount of rain we have been having in the UK.
February was the wettest month nationally since 2002. It was exceptionally wet in the South and West Britain.
February Rainfall
However, weather conditions invariably change quickly in the UK, and no doubt some warmer weather is just around the corner to initiate the spring spurt of growth. Once temperatures have risen above 8 degrees the grass plant will begin to photosynthesize making use of any available plant nutrients in the soil.
A dose of spring or a slow release fertiliser can be applied to the tees to give them an early start. Some greenkeepers may well have already applied slow release products, something like a 30.8.8 which will activate when soil and air temperatures rise.
An application of a liquid iron fertiliser may be applied to the greens to give them some early season colour and harden them up a bit. Some seaweed meal can also be applied. Take care when applying fertilisers, ensure you have calibrated your spreaders / sprayers to ensure they are applying the designated rate of product. Also ensure you do not overlap when applying, thus double dosing your sward.
The recent spell of wet weather may have also disrupted your winter works programme out on the course. Transporting materials and working whilst ground conditions are poor will lead to compaction and surface damage.
Many clubs will have implemented some control on the use of trolleys out on the course. The use of temporary fencing or banning the use of trolleys during wet weather will prevent unnecessary turf damage especially around tees and greens.
Greenkeepers will be gearing themselves for their spring renovation works and preparing the course for the coming playing season. Hollow coring, solid tine spiking and top dressing will be the order of the day, however, you do not want to be smothering the sward with too much top dressing material. Make sure you thoroughly brush and dragmat the material well down into any holes, leaving a clean level surface.
Mowing operations will now have begun in earnest, however, the frequency and height of cut will be dependent on the areas being mown and the type of sward composition you have and maintain.
It is time to recommision your watering systems, make sure you have trimmed around all sprinkler heads removing any grass growth that may affect their operation. Also there may be some heads that have sunk and will require relevelling.
It is also important to ensure you have all your serviced machinery back ready for the new season.
A number of other ancillary tasks can be completed:
Aeration / When conditions allow :- Greens. The type of aeration undertaken in March (solid or hollow tine) will be dependant on the condition of the green. However, many greenkeepers usually start the season with some hollow core aeration, followed by topdressing with a compatible 70/30 material, applying between 1-2 ton per green. It is essential to keep the greens aerated to maintain air and gas exchange in the soil profile, thus improving the drainage capabilities of the greens.
Tees. Aeration of tees will continue. Some greenkeepers will hollow core their tees and topdress with some 70/30 compatible material to restore levels.
Fairways. When the ground conditions are favourable, aerate with solid tines to increase air and gas exchanges in the soil profile. Encouraging deeper rooting of fairway grasses is important. Deeper rooted grasses are more likely to overcome stresses.
Amenity areas / Weekly :- Tidy up any flower and shrub borders around the club house and entrance. Spring flowering materials, such as pansies, bellis, polyanthus and wallflowers can still be planted, but don't delay.
First impressions are important, one of the first areas a customer generally sees when entering the site is often the beds and borders.
Brushing/Sweeping/ Caning / Daily/weekly :- Greens & Tees. Prior to mowing, the surface should be thoroughly brushed or switched. Continue to brush/switch greens and tees daily to remove moisture from the grass surface, stopping the spread of disease and facilitating an improved quality of cut on the dry grass.
Bunkers / Daily/weekly :- Inspect, weed and rake bunkers. Repair any damage from rabbits or other animals, maintain sand up the face of the bunkers to prevent erosion and sand loss. Some golf courses experience flash floods during heavy rain, leaving many bunkers in a poor state (washing out sand from bunker faces). Repair works may be necessary.
Renew/replace any damaged rakes.
Course Inspection / Daily :- Inspect greens, tees, flags and hole positions for damage or vandalism.
Diseases / Daily/weekly :- Greens, Tees and Fairways. Keep an eye on fungal disease attack. The fluctuation in air temperatures may increase the likelihood of disease attack. Use approved fungicides to treat infected areas.
Divotting / As required :- Greens, Tees and Fairways. Repair any divots and scars. Mix grass seed with a soil sand rootzone and back-fill the divots and scars with soil/seed mix. The seed will germinate in favourable weather conditions
Drainage / Weekly :- Inspect drainage outfalls, channels and ditches. Ensure that they are working.
Fertiliser programme / If grass shows signs of stress (weak growth, discoloured) :- Fertiliser treatment and turf tonic can be continued in accordance with your annual programme. If you haven't got a fertiliser programme, have your soil tested; try an independent soil analysis company for an impartial set of results. With spring almost here, supplies should have been ordered and delivered ready for use.
Footpaths / As required :- Keep all footpaths clean and free from debris, check any step details and hand rails (Health & Safety).
Harrowing/raking / When conditions allow :- Fairways. Harrowing/raking helps restore levels and keeps surfaces open.
Hole Changing / As required :- Changing of holes should be carried out regularly, however frequency will be dependant on a number of factors, green size, green construction, tournaments, amount of play and condition of the green. During wet periods it is likely the hole will wear more quickly. This wear is more apparent if the green has thatch problems. The hole will tend to wear quickly and form a depression caused by the placement of the golfers feet. You may be looking to change the hole positions more than three times per week during wet periods.
Some clubs ensure there is a spare hole cut on the green. This enables a quick change especially during frosty conditions.
Inspect Course structures / As required :- The Course, Clubhouse, Car parks. Check and repair fences, seating, shelters, bridges, litter bins, shoe and ball cleaners, signs and tee boxes.
Irrigation / Daily and weekly :- Check and monitor all sprinkler head controls/valves to see that they are working, and check the spray patterns and timing of each and every sprinkler head. Also check any manual systems, hose pipes, sprinklers and pumps.
Trim around sprinkler heads to ensure they can operate.
Ensure the whole irrigation system is inspected and serviced prior to the new season starting, do not leave it too late to arrange your service requirements.
Leaf collection / As required :- Continue to clean up tree debris from playing surfaces
It will be necessary to clean up this debris, by sweeping or caning the playing surfaces. Daily inspections should be made to check on tree debris during stormy weather.
Most golf courses have a range of sweepers and blowers that can be used for leaf and debris collection.
Litter/debris / Daily/weekly :- Greens, Tees and Fairways. Inspect and remove debris from playing surfaces. Litter, twigs and leaves. Regularly empty litter bins/tee boxes.
Machinery (Repairs & Maintenance) / Daily/weekly :- Inspect and clean machinery after use; service and repair damaged machinery.
There is always new machinery coming onto the market, most dealerships will be glad to demonstrate their machinery to you. Take the opportunity to see and try out new bits of kit, especially if you can see it working on your own site.
If you cannot afford new, there are many companies who specialise in second hand machinery. The reputable ones will allow you to trial before committing to a purchase.
Marking out / Weekly :- Mark out trolley areas, out of bound site areas, ground under repair (GUR) and range markings.
Materials / Monthly :- Estimate and order seed, loams and fertilisers, fuels and other consumables.
Mowing / As required :- Mowing frequencies will vary from daily to twice weekly operations dependant on the growth of the grass and the standards set by the course manager. Mowing heights may vary depending on local conditions, type of course, course expectations, sward type and mower type. The mowing heights are a guide, and will be subject to local weather conditions, but remember not to remove more than 1/3 of total grass height in each cut. The less stress that is placed on the grass at this vital time the better the results further on into the coming season.
Greens. Mowing height should be maintained at around 6-8mm.
Tees. Mowing height should be maintained at around 10-15mm.
Banks. Mowing height should be maintained at 22-30mm
Fairways. Mowing height should be maintained at around 15-25mm.
Rough, Semi rough grass areas. Mow and tidy up these areas. Reduce build up of clippings by cutting little and often with a rotary or flail. Mowing height will depend on type of course and the standard of play required. Mowing height of cut during the spring between 50-100mm.
Pest control / As required :- Pests scrounging for food can cause a lot of damage on turf surfaces. Foxes have been known to regularly dig up old hole placements, night after night. Moles and rabbits are still very active.
Badgers, once active, can cause a lot of damage. They can be very destructive when searching for food. Because badgers are a protected species, it is important you contact the local badger society for advice. They can help you find a solution to your problems. In one case the greenkeeper had to set up some feeding trails to entice the badger from feeding near or on the greens. This was achieved by laying dog food underneath a piece of wood, which over a period was gradually moved away from the green.
Birds feeding on grubs and insect larvae can cause severe surface damage.
Chlorpyrifos is the only chemical now available to give you some control of leather jackets. There are a number of products on the market, Lorsban T by Rigby Taylor, Maraund from Scotts and Crossfire 480 by Bayer Environmental Science.
All these products are generally applied in November when the larvae are small and susceptible. Early treatment is recommended.
Merit Turf, by Bayer, has recently been given approval for treatment of chafer grubs.
Ponds, lakes and streams / Weekly :- Inspect all water features on the course, cleaning out any unwanted debris and litter.
Recent stormy wet weather will have contributed a lot of surface water into drains, ditches and water courses. However, when large amounts of water are running into these outlets in a short period of time, it can often result in flooding.
Check all ditches and brooks, make sure the water is running easily, remove any debris that may affect the flow of the streams, brooks or ditches.
Tee boxes, pegs / As required : - All tee boxes, tee pegs and competition markers should be inspected daily, cleaned and moved to new positions as required.
Ensure all tee boxes and pegs are cleaned/repainted for the forthcoming summer season. Inspect signs, especially warning signs, remember to check that they are still valid and lawful.
Top dressing / As required :- Greens & Tees. Ensure you have enough top dressing material for any renovation or repair works carried out.
Spring renovations start this month, ensure you have ordered enough material to complete your renovations (applying between 1-2 tons per green).
Tree Planting / As required :- It is now coming to the end of the tree and shrub planting time (March) particularly bare root material. Ensure you have prepared the planting pits to accommodate the root ball of the tree and the tree is well staked.
Be prepared to water these trees, ground conditions can soon dry out in the spring.
Weather Stations / Daily :- It is important to keep daily records of information collected. Keeping a diary of air temperatures, sunlight hours, wind speed and rainfall are essential. This information is a valuable resource for making important management decisions.
Remember to service and calibrate your weather station, check with suppliers for any upgrades or services.
Wetting agents / As required :- If wetting agents are being used they are generally applied monthly throughout the year.
Wetting agents do help water infiltration. It is important that these wetting agents are watered into the surface to help move the agent deeper down into the soil profile.
Keep updated with product information, new products may help your maintenance regimes, keep yourself informed.
Woodland & conservation areas / As required :- Strong winds can damage trees on golf courses. Inspect and repair or remove damaged trees and/or limbs. Check deer and rabbit guards on whips and saplings. Make a thorough check of general shrub and tree health and contact your local arboriculturalist if required.
Artificial Tees and Mats / Artificial Grass Systems / Weekly :- Some golf clubs may still be using winter tee mats. It is important to keep them clean and free of debris. Regular sweeping and brushing. Remove any algae and moss from surface.
Sand filled systems require regular brushing to maintain manufacturer's recommendations for sand levels and pile heights.
Rubber Tee Mats / As required: - Keep clean. Some clubs have portable winter tee mats, best to clean before storing away.
The following rain statistics from the British Weather Services give an indication of the amount of rain we have been having in the UK.
February was the wettest month nationally since 2002. It was exceptionally wet in the South and West Britain.
February Rainfall
- England and Wales average 107 mm (161% of long term average).
- Scotland average 89 mm (135% of long term average).
- N. Ireland average 73 mm (127% of long term average).
- Highest monthly totals across SW England, maximum totals 250 mm to 350 mm.
However, weather conditions invariably change quickly in the UK, and no doubt some warmer weather is just around the corner to initiate the spring spurt of growth. Once temperatures have risen above 8 degrees the grass plant will begin to photosynthesize making use of any available plant nutrients in the soil.
A dose of spring or a slow release fertiliser can be applied to the tees to give them an early start. Some greenkeepers may well have already applied slow release products, something like a 30.8.8 which will activate when soil and air temperatures rise.
An application of a liquid iron fertiliser may be applied to the greens to give them some early season colour and harden them up a bit. Some seaweed meal can also be applied. Take care when applying fertilisers, ensure you have calibrated your spreaders / sprayers to ensure they are applying the designated rate of product. Also ensure you do not overlap when applying, thus double dosing your sward.
The recent spell of wet weather may have also disrupted your winter works programme out on the course. Transporting materials and working whilst ground conditions are poor will lead to compaction and surface damage.
Many clubs will have implemented some control on the use of trolleys out on the course. The use of temporary fencing or banning the use of trolleys during wet weather will prevent unnecessary turf damage especially around tees and greens.
Greenkeepers will be gearing themselves for their spring renovation works and preparing the course for the coming playing season. Hollow coring, solid tine spiking and top dressing will be the order of the day, however, you do not want to be smothering the sward with too much top dressing material. Make sure you thoroughly brush and dragmat the material well down into any holes, leaving a clean level surface.
Mowing operations will now have begun in earnest, however, the frequency and height of cut will be dependent on the areas being mown and the type of sward composition you have and maintain.
It is time to recommision your watering systems, make sure you have trimmed around all sprinkler heads removing any grass growth that may affect their operation. Also there may be some heads that have sunk and will require relevelling.
It is also important to ensure you have all your serviced machinery back ready for the new season.
A number of other ancillary tasks can be completed:
- Servicing ball washing machines
- Cleaning signs and notices
- Replacing shoe cleaners
- Putting out tee boxes
Aeration / When conditions allow :- Greens. The type of aeration undertaken in March (solid or hollow tine) will be dependant on the condition of the green. However, many greenkeepers usually start the season with some hollow core aeration, followed by topdressing with a compatible 70/30 material, applying between 1-2 ton per green. It is essential to keep the greens aerated to maintain air and gas exchange in the soil profile, thus improving the drainage capabilities of the greens.
Tees. Aeration of tees will continue. Some greenkeepers will hollow core their tees and topdress with some 70/30 compatible material to restore levels.
Fairways. When the ground conditions are favourable, aerate with solid tines to increase air and gas exchanges in the soil profile. Encouraging deeper rooting of fairway grasses is important. Deeper rooted grasses are more likely to overcome stresses.
Amenity areas / Weekly :- Tidy up any flower and shrub borders around the club house and entrance. Spring flowering materials, such as pansies, bellis, polyanthus and wallflowers can still be planted, but don't delay.
First impressions are important, one of the first areas a customer generally sees when entering the site is often the beds and borders.
Brushing/Sweeping/ Caning / Daily/weekly :- Greens & Tees. Prior to mowing, the surface should be thoroughly brushed or switched. Continue to brush/switch greens and tees daily to remove moisture from the grass surface, stopping the spread of disease and facilitating an improved quality of cut on the dry grass.
Bunkers / Daily/weekly :- Inspect, weed and rake bunkers. Repair any damage from rabbits or other animals, maintain sand up the face of the bunkers to prevent erosion and sand loss. Some golf courses experience flash floods during heavy rain, leaving many bunkers in a poor state (washing out sand from bunker faces). Repair works may be necessary.
Renew/replace any damaged rakes.
Course Inspection / Daily :- Inspect greens, tees, flags and hole positions for damage or vandalism.
Diseases / Daily/weekly :- Greens, Tees and Fairways. Keep an eye on fungal disease attack. The fluctuation in air temperatures may increase the likelihood of disease attack. Use approved fungicides to treat infected areas.
Divotting / As required :- Greens, Tees and Fairways. Repair any divots and scars. Mix grass seed with a soil sand rootzone and back-fill the divots and scars with soil/seed mix. The seed will germinate in favourable weather conditions
Drainage / Weekly :- Inspect drainage outfalls, channels and ditches. Ensure that they are working.
Fertiliser programme / If grass shows signs of stress (weak growth, discoloured) :- Fertiliser treatment and turf tonic can be continued in accordance with your annual programme. If you haven't got a fertiliser programme, have your soil tested; try an independent soil analysis company for an impartial set of results. With spring almost here, supplies should have been ordered and delivered ready for use.
Footpaths / As required :- Keep all footpaths clean and free from debris, check any step details and hand rails (Health & Safety).
Harrowing/raking / When conditions allow :- Fairways. Harrowing/raking helps restore levels and keeps surfaces open.
Hole Changing / As required :- Changing of holes should be carried out regularly, however frequency will be dependant on a number of factors, green size, green construction, tournaments, amount of play and condition of the green. During wet periods it is likely the hole will wear more quickly. This wear is more apparent if the green has thatch problems. The hole will tend to wear quickly and form a depression caused by the placement of the golfers feet. You may be looking to change the hole positions more than three times per week during wet periods.
Some clubs ensure there is a spare hole cut on the green. This enables a quick change especially during frosty conditions.
Inspect Course structures / As required :- The Course, Clubhouse, Car parks. Check and repair fences, seating, shelters, bridges, litter bins, shoe and ball cleaners, signs and tee boxes.
Irrigation / Daily and weekly :- Check and monitor all sprinkler head controls/valves to see that they are working, and check the spray patterns and timing of each and every sprinkler head. Also check any manual systems, hose pipes, sprinklers and pumps.
Trim around sprinkler heads to ensure they can operate.
Ensure the whole irrigation system is inspected and serviced prior to the new season starting, do not leave it too late to arrange your service requirements.
Leaf collection / As required :- Continue to clean up tree debris from playing surfaces
It will be necessary to clean up this debris, by sweeping or caning the playing surfaces. Daily inspections should be made to check on tree debris during stormy weather.
Most golf courses have a range of sweepers and blowers that can be used for leaf and debris collection.
Litter/debris / Daily/weekly :- Greens, Tees and Fairways. Inspect and remove debris from playing surfaces. Litter, twigs and leaves. Regularly empty litter bins/tee boxes.
Machinery (Repairs & Maintenance) / Daily/weekly :- Inspect and clean machinery after use; service and repair damaged machinery.
There is always new machinery coming onto the market, most dealerships will be glad to demonstrate their machinery to you. Take the opportunity to see and try out new bits of kit, especially if you can see it working on your own site.
If you cannot afford new, there are many companies who specialise in second hand machinery. The reputable ones will allow you to trial before committing to a purchase.
Marking out / Weekly :- Mark out trolley areas, out of bound site areas, ground under repair (GUR) and range markings.
Materials / Monthly :- Estimate and order seed, loams and fertilisers, fuels and other consumables.
Mowing / As required :- Mowing frequencies will vary from daily to twice weekly operations dependant on the growth of the grass and the standards set by the course manager. Mowing heights may vary depending on local conditions, type of course, course expectations, sward type and mower type. The mowing heights are a guide, and will be subject to local weather conditions, but remember not to remove more than 1/3 of total grass height in each cut. The less stress that is placed on the grass at this vital time the better the results further on into the coming season.
Greens. Mowing height should be maintained at around 6-8mm.
Tees. Mowing height should be maintained at around 10-15mm.
Banks. Mowing height should be maintained at 22-30mm
Fairways. Mowing height should be maintained at around 15-25mm.
Rough, Semi rough grass areas. Mow and tidy up these areas. Reduce build up of clippings by cutting little and often with a rotary or flail. Mowing height will depend on type of course and the standard of play required. Mowing height of cut during the spring between 50-100mm.
Pest control / As required :- Pests scrounging for food can cause a lot of damage on turf surfaces. Foxes have been known to regularly dig up old hole placements, night after night. Moles and rabbits are still very active.
Badgers, once active, can cause a lot of damage. They can be very destructive when searching for food. Because badgers are a protected species, it is important you contact the local badger society for advice. They can help you find a solution to your problems. In one case the greenkeeper had to set up some feeding trails to entice the badger from feeding near or on the greens. This was achieved by laying dog food underneath a piece of wood, which over a period was gradually moved away from the green.
Birds feeding on grubs and insect larvae can cause severe surface damage.
Chlorpyrifos is the only chemical now available to give you some control of leather jackets. There are a number of products on the market, Lorsban T by Rigby Taylor, Maraund from Scotts and Crossfire 480 by Bayer Environmental Science.
All these products are generally applied in November when the larvae are small and susceptible. Early treatment is recommended.
Merit Turf, by Bayer, has recently been given approval for treatment of chafer grubs.
Ponds, lakes and streams / Weekly :- Inspect all water features on the course, cleaning out any unwanted debris and litter.
Recent stormy wet weather will have contributed a lot of surface water into drains, ditches and water courses. However, when large amounts of water are running into these outlets in a short period of time, it can often result in flooding.
Check all ditches and brooks, make sure the water is running easily, remove any debris that may affect the flow of the streams, brooks or ditches.
Tee boxes, pegs / As required : - All tee boxes, tee pegs and competition markers should be inspected daily, cleaned and moved to new positions as required.
Ensure all tee boxes and pegs are cleaned/repainted for the forthcoming summer season. Inspect signs, especially warning signs, remember to check that they are still valid and lawful.
Top dressing / As required :- Greens & Tees. Ensure you have enough top dressing material for any renovation or repair works carried out.
Spring renovations start this month, ensure you have ordered enough material to complete your renovations (applying between 1-2 tons per green).
Tree Planting / As required :- It is now coming to the end of the tree and shrub planting time (March) particularly bare root material. Ensure you have prepared the planting pits to accommodate the root ball of the tree and the tree is well staked.
Be prepared to water these trees, ground conditions can soon dry out in the spring.
Weather Stations / Daily :- It is important to keep daily records of information collected. Keeping a diary of air temperatures, sunlight hours, wind speed and rainfall are essential. This information is a valuable resource for making important management decisions.
Remember to service and calibrate your weather station, check with suppliers for any upgrades or services.
Wetting agents / As required :- If wetting agents are being used they are generally applied monthly throughout the year.
Wetting agents do help water infiltration. It is important that these wetting agents are watered into the surface to help move the agent deeper down into the soil profile.
Keep updated with product information, new products may help your maintenance regimes, keep yourself informed.
Woodland & conservation areas / As required :- Strong winds can damage trees on golf courses. Inspect and repair or remove damaged trees and/or limbs. Check deer and rabbit guards on whips and saplings. Make a thorough check of general shrub and tree health and contact your local arboriculturalist if required.
Artificial Tees and Mats / Artificial Grass Systems / Weekly :- Some golf clubs may still be using winter tee mats. It is important to keep them clean and free of debris. Regular sweeping and brushing. Remove any algae and moss from surface.
Sand filled systems require regular brushing to maintain manufacturer's recommendations for sand levels and pile heights.
Rubber Tee Mats / As required: - Keep clean. Some clubs have portable winter tee mats, best to clean before storing away.
Article Tags:
Golf